SEA 9745

4G/GPS Communication Module

Part Number: 60000070


  • Only for USA (AT&T,T-Mobile)!
  • Tri-band in 4G networks: 700 / 1700 (AWS,B4) / 2100 MHz
  • Tri-band in 3G networks: 850 / 1900 / 2100 MHz
  • Quad- and in 2G networks: 850 / 900 / 1800 / 1900 MHz
  • Gross data rate up to 100 Mbit/s (DL) and 50 Mbit/s (UL) via LTE
  • Remote access via mobile network (VPN)
  • Text messages via SMS
  • GPS for geo-positioning, timing and synchronization
  • Web-based configuration
  • Operating temperature range from -25 to +60 °C

Download software


    The SEA 9745 is a high performance cRIO module for communication in mobile networks of the latest generation (4G). The module operates as a data modem, providing access to the internet via mobile networks. For the communication all currently available standards and protocols like GPRS/EDGE (2G), UMTS/HSPA (3G) or LTE (4G) can be used. The maximum gross data transmission rates are up to 50 Mbit/sec for upload and up to 100 Mbit/sec for download in 4G (LTE) networks.
    The integrated high-sensitive-50-channel GPS receiver provides an accurate geo-position and precise time information with an update rate of up to 4 Hz. For timing, synchronisation or triggering, the module supplies an additional time pulse output signal (TTL) to the backplane. A built-in backup battery enables cold starts within few seconds for a fast GPS position determination (GPS fix). SEA 9745  provides a socket for connecting of external GPS receivers, if special requirements for the GPS functionality exist.. ”‹”‹
    The Mini-SIM card reader is located on the backside of the module with mechanical lock mechanism. Micro-SIM cards can be used with a corresponding adapter.
    The module is directly connected by the Ethernet bridge cable with the CompactRIO Real-Time Controller. The power supply of 7 to 30 VDC can be done with the enclosed power cable via the CompactRIO DC supply.


    • This module is made for operation in USA. For other countries use SEA 9744. For Japan use SEA 9724.
    • This module can be used in all CompactRIO systems with FPGA backplane. The use in CompactDAQ systems with real-time controller (eg NI cDAQ-9132) or stand-alone is also possible if no GPS data is needed directly in the FPGA.


    Scope of Delivery: 

    • 1* SEA 9745
    • 1* Printed operation instructions, safety guidelines and specifications


    • 1 * Power cable (61000011), is mandatory for the operation.
    • 1 * Ethernet bridge cable ( 61000016), is mandatory for the operation.
    • GSM antenna - is mandatory for the operation. Matching GSM antennas can be found in our shop.
    • SIM card - is mandatory for operation, only available at MNO.
    • GPS antenna - is mandatory for the operation. Matching GPS antennas can be found in our shop.
    • Ext. GPS cable


    • Is available as free download from our web site. For installation JKI VI Package Manager (VIPM) is required.
    • Contains  programming examples (LabVIEW Example Finder).
    • Requires NI LabVIEW 2013 or later development environment incl. Real-Time and FPGA software modules.


    Pre Payment

    Payment options:

    • credit cards:
    • pre payment

    Note: Prices are exclusive of VAT

    The current prices in € and $ can be found in our shop


    • We support you with the implementation of your application
    • For the SEA 9745 module a warranty extension is available.
    • For OEM customers the SEA 9745 can be supplied optional without housing (PCB Only). Please note that certifications do not apply in this case and may have to be perform separately for the final product. Please contact us
    • Technical support