3G Order Numbers 60000037
The cRIO 3G module offers modern standards of telecommunication. Basing on 3G standard higher data transfer rates are reachable than using conventional GSM modules.
The new 3G software allows you to update a DynDNS profile, so you can always access your module via a static internet address. Besides you have remote connection to the CompactRIO system via a VPN server.
The 3G module additionally offers GPS function for position and time determination of CompactRIO systems.
The cRIO 3G module can also be used with the National Instruments CompactDAQ Ethernet chassis.
Function
cRIO GXXX 3G module is a high performance module for the mobile communication via modern GSM 3G standards and additional GPS functionality to supply accurate position and time information with the build in 50 channel receiver.
The communication can be done with different frequencies via GPRS/EDGE (850/900/1800/1900 MHz) and UMTS/HSPA (850/1900/2100 MHz) protocol which can supply data transmission rates up to 7.2 Mbit/s.
Supports worldwide data transfer with multi-band technology. SIM card reader with mechanical lock mechanism. GPS programmable update rate of up to 10 Hz. The module supplies a PPS pulse output (TTL) signal to the backplane. Module is directly connected via the ethernet bridge cable with the CompactRIOTM Controller.
As an optional accessory there is a mounting kit available to mount the module as a 5th or 9th module to a CompactRIO Chassis. See Order No 60000057.
Included Accessories:
1 * Ethernet bridge cable
1 * Power cable
1 * Hardware manual.
1 * Driver & Config-Software for LabVIEW 8.x or higher and user manual as download.
Technical data
HSPA | HSDPA SB | HSDPA NTT | |||
|---|---|---|---|---|---|
GSM Functions | |||||
GSM frequencies [MHz] | 850, 900, 1800, 1900, 2100 | 850, 900, 1800, 1900, 2100 | |||
GSM protocols | GPRS/EDGE Class 10, UMTS, HSDPA | GPRS/EDGE, UMTS, HSDPA | |||
Power Supply | |||||
Supply voltage frontpanel connector [V DC] | 7...30 | ||||
Apparent power [VA] ø at 12 V | 3,3 | ||||
Supply current peak at 12 V [mA] | 0,2...0,3 | ||||
Average current | dependent on used communication standard between 85 mA and 250 mA | ||||
Connectors | |||||
GSM connector | SMA | ||||
GPS antenna connector | MCX | ||||
Environmental conditions | |||||
Operating temperature range [° C] | -30...+60 | ||||
Relative humidity [%] non condensing | 10...90 | ||||
Size [mm] | 80 x 88 x 23 | ||||
Weight [g] | 190 | ||||
Accessories
Accessories for this module are available in our shop
Downloads
cRIO 3G Downloads -
cRIO 3G Freie Downloads -
Shop Info
Scope of Delivery
- Driver software
- VIs and programming examples for LabVIEW 8.x/9.x
- Manual
These files are available for download.
Shop info
Our modules and the respective accessories can be ordered in our Shop. The SEA cRIO 3G modules have the order numbers SEA 9721 (60000037), SEA 9724 ( 60000060), SEA 9744 (60000068), SEA 9745 (60000070), SEA 9746 (60000072).
TM[CompactRIO,LabVIEW] is a trademark of National Instruments. Neither [S.E.A.], nor any software programs or other goods or services offered by [S.E.A.], are affiliated with, endorsed by, or sponsored by National Instruments.