Accessories

We recommend to use only accessories tested for the use with SEA cRIO modules. Information about accessories as antennas, power supplies, or cables can be found in our Shop

GPS antenna for roof mounting

cRIO Sync Toolkit

The GPS Synchronization Toolkit (GST) synchronizes distributed CompactRIO systems and correlates their measurements basing on the GPS time stamp with an accuracy of few microseconds.

SEA 9404 GPS MOBILE Modul

GPS MOBILE Module for CompactRIOTM or R-Series Expansion

Order Number 60000001

SEA cRIO GPS module

Via a GPS receiver in the Gxxx, GPS modules signals of the american GPS system can be received. This allows to get the current position of the CompactRIO system and the current time. So independence of the CompactRIO time base is reached and exact timing information is provided worldwide. Time and position data can be called by VIs.

For precise time measurements or time related data acquisition position and time signals can be processed with the FPGA.

Signal reception takes place by an active GPS antenna, which is connected by a MCX connector to the cRIO module. The antenna is provided with a operating voltage of 3.3 V by the antenna connector.

Please note, that the SEA cRIO-GPS modules can not be used with National Instruments CompactDAQ.

Function

cRIO Module with GPS function and PPS pulse output. Module contains a 50-channel GPS receiver and supplies accurate time and position data with up to 4Hz update rate. The module supplies a programmable PPS pulse output (TTL) via a front panel connector, but can also route the PPS signal to the backplane.
Driver software and examples for LabVIEW 8.x or higher is available as download.

Technical data

Functions

GPS

GPS update rate [Hz] up to

4

Programmable pulse output

Frontpanel connector (TTL), backplane

Antenna power supply

3.3 V / max. 40 mA

GPS antenna connector

MCX

Power Supply

Supply voltage backplane [V]

5

Antenna power supply [mA]

60

Environmental

Operating temperature range [° C]

-40 to + 80 ° C

Relative humidity [%] non condensing

10 to 90

Weight [g]

175

Size [mm]

80 x 88 x 123

Accessories

Accessories for this module are available in our shop.

Downloads

For access to all downloadable files please register and log in.

Shop-Info

Scope of Delivery

  • Driver software
  • VIs and programming examples for LabVIEW 8.x/9.x
  • Manual

These files are available for download.

Shop info

Our modules and the respective accessories can be ordered in our Shop. The SEA cRIO GPS module has the order number 60000001.

Shop...

TM[CompactRIO,LabVIEW] is a trademark of National Instruments. Neither [S.E.A.], nor any software programs or other goods or services offered by [S.E.A.], are affiliated with, endorsed by, or sponsored by National Instruments.